Motor Count

Use this menu to count and instate the motors in the machine.

	Step	Highlighted
1.	Press Service Mode Button
2.	Press 4 or 6 until Diag is highlighted	Diag
3.	Press 8 to highlight Motor Count	Motor Count
4.	Press # to enter. The current Motor Count will be shown	Current Motor Count XX
5.	The display will then show the Current Motor Status. The motors that are present in the machine will be green while the motors that are not in the machine will be grey.	10,11,12,13,14,15,16,17,18,19, 20,21,22,23,24,25,26,27,28,29, 30,31,32,33,34,35,36,37,38,39, 40,41,42,43,44,45,46,47,48,49, 50,51,52,53,54,55,56,57,58,59, 60,61,62,63,64,65,66,67,68,69, # motor count *-exit
6.	Press # to run a new Motor Count.	Current Motor Count XX
7.	The controller will count the motors, display DB update in progress then display the new motor count.	Motor Count XX Coin Return Motor Present *- Exit
8.	Press * one time to return to the Diag menu or three times to exit.