How do I create a Picklist with or without a Supply Room?

1. Verify that there is product in the Supply Room that will be used to pull product from
2. Verify the machine/s that will be stocked have quantities of product in them less than the “Fill Level”
3. Select the drop down menu for “Machines”
4. Select “Pick List”
5. Select either “Pick List” to pick products from a Supply Room, or “Pick List – W/O Supply Room” if you do not have a Supply Room set up
6. Select the options at the top of the menu for how the Pick List should be run:
   1. Select if the Pick List is for the Entire Account, A specific Location, A specific Machine
   2. Select the Fill Level type: Par Level or Max Level, “Par Level” will refill the machine/s to the Par Level and “Max Level” will refill the machine/s to the Max Depth level
   3. In the drop down select the “Supply Room” that the products will be pulled from (you will not see this option if you select “Pick List – W/O Supply Room”
   4. Select other applicable information for the Pick List depending on if “Account, Location, or Machine” was selected
   5. Select “Generate Pick List”
7. The Pick List will be created for the machine/s that were selected
8. Users can View and edit the quantities for the Pick List per machine
9. Users can then Accept the Pick List and those quantities will be added to the machine Planogram selections
10. If the Pick List will not be used select the “Delete” actions button for that Pick List